|
Post by bikezen on Nov 17, 2010 10:41:27 GMT -5
I have to replace the interior fiberglass poles (lost by previous owner), can someone provide me with the length? Thanks in advance! David
|
|
|
Post by triplepoint on Nov 30, 2010 15:40:48 GMT -5
I can look at mine if that would help. I have one that is designed for a full size chevy truck. Is this the right size for you?
|
|
|
Post by bikezen on Nov 30, 2010 17:58:21 GMT -5
If you can measure your interior tent poles, that would be very helpful.
The tent size is the same regardless of canopy size i believe?
Thanks Again, David
|
|
|
Post by bikezen on Dec 6, 2010 10:36:51 GMT -5
Thanks for the clarification.
It is for a short bed (Sm Truck) Wildernest
David
|
|
|
Post by triplepoint on Dec 6, 2010 23:01:11 GMT -5
Mines a long bed, sorry, can't help
|
|
|
Post by bikezen on Dec 7, 2010 16:55:22 GMT -5
Thanks for trying..
FYI The dimensions on mine are 80x62 (Its for a mid-sized truck like the older S-10)
I have mine mounted on a 01 Tacoma w/ some modifications (because its 4" too long)
I measured the area where the poles go and they should be close to 56" or 58"
Thanks David
|
|
|
Post by Bike Zen on Dec 12, 2010 21:11:04 GMT -5
Bump>>>
Anyone?
|
|
|
Post by damion on Dec 13, 2010 15:21:27 GMT -5
I'm interested in this question too. I have the poles, but it looks like the ends have gotten chewed up through use and miss-care by previous owner and therefore the poles are shorter and do not provide the roof tension they should. I was hoping to either find some sort metal protective end cap for the poles, or new poles. Any recommendations?
|
|
|
Post by jhubbard on Jul 11, 2011 12:47:51 GMT -5
I have to replace the interior fiberglass poles (lost by previous owner), can someone provide me with the length? Thanks in advance! David
|
|
|
Post by jhubbard on Jul 11, 2011 12:49:31 GMT -5
I have to replace the interior fiberglass poles (lost by previous owner), can someone provide me with the length? Thanks in advance! David I haven't seen a response to David's query. I have a full size nest but only 3 poles. One of which has no aluminum tips. Does anyone have the sizes of all the poles? TIA Jon
|
|
|
Post by austintaco on Aug 30, 2011 14:35:50 GMT -5
I have to replace the interior fiberglass poles (lost by previous owner), can someone provide me with the length? Thanks in advance! David I haven't seen a response to David's query. I have a full size nest but only 3 poles. One of which has no aluminum tips. Does anyone have the sizes of all the poles? TIA Jon I just picked up my nest, and found the pdf for the user manual online. according to the manual, you should have 4 poles, two longer poles over the bed area and 2 shorter poles over the bed of the truck.
|
|
|
Post by Wildernest_ADV on Jan 14, 2016 20:37:05 GMT -5
Ha! well I just spent a couple hours with some thrift shop tent poles... started long and then cut them down until they fit okay. might do some more tweaking but they seem to support the tent pretty well. Bikezen. you might need to try trial and error too. :/ when I get mine fitting just right I'll measure them and post it.
|
|